-
Hawthorne Nevada Deep Direct-Use Feasibility Study - Data Used for Geothermal...
This data submission includes several data components that were used to develop a conceptual model and power capacity-estimates of two low-temperature geothermal resources that... -
Deep Direct-Use Feasibility Study Computed Tomography (CT)-scanned data Analy...
The computed tomography (CT) facilities at the National Energy Technology Laboratory (NETL) Morgantown, West Virginia site were used to characterize core of the Tuscarora... -
EGS Collab Experiment 1: Microseismic Monitoring catalog_manual_all_v190312.csv
The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for enhanced... -
Utah FORGE: Earth Model Native State Simulation Results reservoir-porosity-an...
Utah FORGE phase 2C Native State Simulation zip contains the data used for the boundary conditions and subsequent native state simulation results obtained using the simulation... -
EGS Collab Testbed 1: Second Set Tracer Test Results Mattson et al 2019_Stanf...
The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ experiments.... -
EGS Collab Testbed 2: Laser Scanned 4100 L Drift Map 6ft 4100L LCleaned.dxf
The EGS Collab project is evaluating a site for Experiment 2 (hydraulic fracturing/shearing) at a depth of 1.25 km in the Sanford Underground Research Facility (SURF) on the... -
Utah FORGE: Well 58-32 Stimulation Data 58-32_OpenHoleStimulation_readme (1).txt
Pressure, temperature, and flow data from open-hole, upper perforation, and lower perforation well stimulations gathered from various tools collected at well 58-32 during phase... -
Utah FORGE: Earth Model Mesh Data for Selected Surfaces 175C_vertices.csv
This submission contains a number of data files with vertices of meshed/interpolated surfaces used in the Phase 2B earth model. Examples include land surface (based on 10-meter... -
Utah FORGE: Well 58-32 Stimulation Data 58-32_LowerPerfStimulation (1).xlsx
Pressure, temperature, and flow data from open-hole, upper perforation, and lower perforation well stimulations gathered from various tools collected at well 58-32 during phase... -
Utah FORGE: 2D and 3D Seismic Data 901-1122c.zip
This set of data contains raw and processed 2D and 3D seismic data from the Utah FORGE study area near Roosevelt Hot Springs. The zipped archives numbered from 1-100 to... -
Deep Direct-Use Feasibility Study Economic Analysis using GEOPHIRES for West ...
This dataset contains all the inputs used and output produced from the modified GEOPHIRES for the economic analysis of base case hybrid GDHC system, improved hybrid GDHC system... -
2016 Passive Seismic Imaging of the Dixie Valley Geothermal Well Field for EG...
This submission provides reports on the results of seismic data analyses, statistical data sets of rock properties under the DVGWF, GIS data for new maps of EGS favorability,... -
Utah FORGE: Well 58-32 Core Analyses 58-32_Cores_Testing_Results.zip
This dataset contains final reports regarding stress measurements, permeability measurements, and mechanical properties from the core testing of well 58-32, in PDF format, and... -
Utah FORGE: Earth Model Native State Simulation Results native-state-ptm.zip
Utah FORGE phase 2C Native State Simulation zip contains the data used for the boundary conditions and subsequent native state simulation results obtained using the simulation... -
Deep Direct-Use Feasibility Study Economic Analysis using GEOPHIRES for West ...
This dataset contains all the inputs used and output produced from the modified GEOPHIRES for the economic analysis of base case hybrid GDHC system, improved hybrid GDHC system... -
Utah FORGE: 3D Gravity Data FORGE_3D_gravity (1).zip
These resources describe the 3D geophysical inversion modeling of gravity data at the FORGE site near Milford, Utah. FORGE is the Frontier Observatory for Research in Geothermal... -
Utah FORGE: Earth Model Mesh Data for Selected Surfaces 225C_vertices.csv
This submission contains a number of data files with vertices of meshed/interpolated surfaces used in the Phase 2B earth model. Examples include land surface (based on 10-meter... -
Fault Information and Seismicity for the Portland Basin Deep Direct-Use Feasi...
Included in this dataset is a spreadsheet with the primary fault information used in the basin model, a spreadsheet with earthquake magnitude estimates, and a figure showing... -
Deep Direct-Use Feasibility Study Computed Tomography (CT)-scanned data Analy...
The computed tomography (CT) facilities at the National Energy Technology Laboratory (NETL) Morgantown, West Virginia site were used to characterize core of the Tuscarora... -
Utah FORGE: 2D and 3D Seismic Data Velocity.zip
This set of data contains raw and processed 2D and 3D seismic data from the Utah FORGE study area near Roosevelt Hot Springs. The zipped archives numbered from 1-100 to...